4 Tips To Help You Successfully Swap Out Your Bike’s Brakes

Posted by on Feb 13, 2017 in Blog

Hitting the open road on your bicycle can be a great way to unwind and get in some extra exercise. The bikes that are made for adults often have a complex braking system that is designed to help the rider maintain safety and control over the bike at all times. Ensuring that the brakes on your bike are in good condition is vital to maintaining the overall condition of your bicycle.

Here are four tips that you can use to ensure you are able to successfully swap out the brakes on your bike when the time for a new braking system arrives.

1. Wear plastic gloves when working on your brakes.

It’s important that you wear some plastic gloves that fit your hands snugly while you are working on your bicycle’s braking system. The oil from your fingertips could mar the surface of disc brakes, making them less effective. By wearing plastic gloves, you ensure that no oils are transferred from your skin to your new brakes during installation.

2. Only work on one brake at a time.

Taking apart your bicycle’s braking system in order to install new parts can seem easy, but putting the braking system back together again can be a real challenge. You should only work on one brake at a time so that you always have an intact brake to reference as you put together your bicycle’s newly-replaced braking system.

3. Make the switch to cartridge-style brake pads.

If your bicycle came equipped with bolt-on brake pads, you should make the switch to cartridge-style pads when the time to replace your bike’s brakes arrives. Cartridge-style brake pads can easily be slipped in and out of their holder without the need for time-consuming alignment once the brake pads have been replaced in the future.

4. Rough up your glazed brake pads.

If the new brake pads you have purchased for your bicycle are glazed, it can be beneficial to rough up the surface of the pads before installation. Your bike will be able to brake a lot better when the brake discs have a slightly rough surface to grip onto. Lightly rubbing the surface of glazed brake pads with some sandpaper can provide the added grip needed to increase your bike’s braking power.

Being able to swap out the old brakes on your bicycle ensures that you will have access to a functional braking system at all times. To increase the success of your next bicycle brake job, be sure that you don’t handle the brakes with your bare hands, you work on only one brake at a time, you opt for cartridge-style brakes, and you rough up glazed brake pads prior to installation. For more information, contact companies like Sarasota Cyclery Inc.